Step 1 - Update your app

You need to have the most recent version of the SecurePark app. If you aren't sure what version you're on, go to the Google Play Store and search for SecurePark. If there is no update button and only an Open button, you are fully up-to-date. If there is an update button, you can update the app from there. 

Step 2 - Login to the app

Open the SecurePark app and login with your credentials.

Step 3 - Choose a Location

In the app, select a location.

If you will be enforcing underground or somewhere with poor connection, you can go to Settings -> Offline Mode before you go underground to put the app into Offline mode. You must have selected a location and loaded all active sessions under that location first for this to work. 

Step 4 - Launch Scanner

Click on Launch Scanner when you've chosen your location. You will see the below screen: (you can change to landscape, or from landscape to portrait mode, under Settings > LPR) 

Hitting SCAN will start the scanner. You can then immediately begin to scan license plates.  

Note that the scanner will be more accurate if you scan from the top of the license plate down, rather from side-to-side. As it scans quite quickly, scanning from side-to-side may have LPR read only read the plate partially. 

If applicable, you can adjust the license plate box (the one with the white corners in the image above) with your fingers to a desired size. When scanning, this box is what will be used to read the plates, so you will need to ensure the entire license plate is in the box. 

Step 5 - Scan

All scans will result in a confirmation screen. If the plate is correct, simply press the green arrow. If the plate is incorrect, you can click directly on the license plate and edit the result of the plate with your keyboard, then hit the green check to correct.